700 Series Z-Wave Plus On/Off Toggle Switch ZEN73, White - Direct 3-Way (No Add-On Switch Needed) - Z-Wave Hub Required 700 Toggle Switch ZEN73

note: do not connect this switch to ceiling fans, motors, or home appliances neutral wire required

Specifications:

• model number: zen73 800lr
• z-wave region: us/ca/mx
• power: 120 vac, 60 hz
• maximum loads: 150w led, 600w incandescent, 8a resistive
• z-wave range: up to 300 feet line of sight (no walls or obstructions)
• operating temperature: 32-104° f (0-40° c)
• installation and use: indoor only

Will it work with my smart speaker?

you smart speaker is not a z-wave controller so you will need a compatible z-wave hub to control this switch with voice commands. smart speaker compatible z-wave hubs include:

• fibaro home center lite
• hubitat
• compatible with smartthings (aeotec smart home hub)
• home assistant (z-wave js)
• ring alarm

• FAST WIRELESS AND LOCAL CONTROL: Manual or remote on/off control from your mobile device or computer (when included to a Z-Wave gateway controller - sold separately. Smart speakers are NOT Z-Wave hubs). Reports status instantly.
• NEW SIMPLE DIRECT 3-WAY: Patented solution for 3-way and 4-way installations! No add-on switch needed, no need to rewire the other boxes. Just wire the ZEN73 switch in the box with direct connection to power (it needs to replace an existing 3-way switch) according to the appropriate diagram. Works with mechanical 3-way switches as long as NEUTRAL is present.
• NEW 700 SERIES MODEL: Just 1.1" deep to easily fit in crowded and shallow boxes. 700 series Z-Wave chip for faster response time and better wireless range boosted by optimal antennae positioning. Remembers and restores on/off status after power failure. Do NOT use as direct replacement for the ZEN23 model in 3-way set-ups, always follow the wiring in the manual.
• WORKS WITH YOUR HUB! Based on the universal binary switch command class - supported by most Z-Wave controllers (does NOT work directly with smart speakers). Lifetime tech support and 5-year extended warranty once registered.
• CHECK YOUR WIRING FIRST: Neutral wire is required to complete installation! Do NOT use the ZEN73 model as direct replacement for the older ZEN23 or ZEN24 switches - they wire differently in multi-point control set-ups, always follow the appropriate diagram or ask Zooz for help.